> News > Industry News

Technical parameters of master oil filter

2020-03-17

Oil is the blood of life, car bearing lubrication oil in the engine protection, cooling, cleaning, anticorrosion and sealing and other vital role, after long-term use will deteriorate, because the oil through the oil filter to get to the lubrication part, so the effect of oil filter is to filter impurities into the engine oil system, to prevent the impurities of the oil in the use of cycle continuously with block, oil, and even damaged engines, such as the emergence of serious consequences.
The precision, reliability and service life of modern engines depend on the maintenance degree of lubricating oil. The performance of the lubricating oil depends on the quality of the lubricating oil itself and the quality of the filter, with good oil must choose a good filter;
The function of the oil filter is to filter the sludge in the engine oil circulating, the impurities generated by the engine oil itself deterioration, to prevent the oil deterioration, to prevent the engine parts wear; In addition, when the oil filter is blocked, let the oil flow out properly to ensure normal oil pressure; In the case of cold start, frequent restart, short distance driving, high speed driving on the highway, the oil filter should ensure the best oil supply.

Oil filter generally requires 5000 km replacement, to achieve the best use effect.

There are certain standards for the selection of oil filters, which can be purchased in accordance with the following standards:

1. High filtration accuracy, filtering out all 30um particles;
2. Reduce the particles that enter into the lubrication gap and cause wear (3um-30um);
3. The oil flow conforms to the engine oil demand;
4, long replacement cycle, at least longer than the oil life (km, time);
5. The filtration accuracy meets the requirements of protecting the engine and reducing wear;
6. Large ash capacity, suitable for harsh environment;
7. Can adapt to higher oil temperature and corrosion;
8, the lower the pressure difference when filtering oil, the better, so that the oil through smoothly.

M, the company's oil filter filtration precision is high, the carrying capacity is strong, strong ability to resist corrosive chemicals, and USES the solid shell with a high quality appearance, have accurate opening pressure bypass valve and best performance check valve, made of high quality silica gel shell stress corrosion, with the hand rotating filter base joint can be installed to the sealing ring and quick installation, easy to remove.
Good filters keep the oil clean and only clean oil circulating in the system, which will greatly increase the engine's energy output and reliably prevent wear and tear, reliably prevent increased fuel consumption and the associated high pollution emissions.

Shell: using single plate, thickness of 0.5 mm, to ensure that the impact of high oil pressure is not easy to deformation, the top design water chestnut is clearly visible, in order to install twist, shell after phosphating coating white light powder, surface font is used in the industry's first automatic double color silk screen printing equipment, exquisite design, appearance concise and atmosphere, convenient processing technology mature and applicable.
Screw close plate: the surface of screw close plate at the bottom of the product is marked with thread, which makes it easier to identify the thread specification of the product. The guide step is designed at the thread mouth, so that the screw teeth can be quickly guided on the base of the screw teeth during the installation. All the oil inlet holes at the bottom are designed with chamfering, which makes the appearance more beautiful.
Oil filter - paper core production
Filter paper: using osilong 175g/m, fold distance evenly, fold enough, to ensure that the filter area can meet the performance requirements. The filtration efficiency is up to more than 90%, the flow resistance is less than 0.025mpa, the oil can be timely supplied to the parts of each required lubricating oil, the service life is up to more than 8000km, the dust capacity is up to 0.15g/10000mm2.
Filter paper clip
Operation requirements: confirm the model of the logo, and after debugging the strip clamping machine, put both ends of the filter paper into the strip clamping machine to make a strip, and the strip height is the same as the height of the filter paper. No burrs at both ends of the clip, no looseness between both ends of the filter paper and the clip; Before starting production, it is necessary to confirm whether all the set conditions are normal and check whether the wire terminals of each line are locked.
80T press (punch) - can continuously produce end cover body riveting
Upper end cover: galvanized sheet with a thickness of 0.4mm. The outer cover is designed with 4 convex hulls to ensure that the filter element is concentric with the flange and does not deviate from the position. The check valve can also be installed effectively and correctly.
Rubber ring: adopt butyl rubber, the color is black, the rubber hardness is 70°, the shape design is square to make its sealing performance better
bake
Operation requirements: set the oven temperature before baking, when the temperature in the oven reached the set value, the up and down adhesive paper core cover on the top of the oven screen, into the oven, bake, paper core after baking, must check whether the product is stuck, hanging, cover without stains, paper peak is uniform, whether the color is burnt and other bad phenomenon.

Previous:SAE oil filter test standard

Next:The Role of The Fuel Filter